How to operate the wood chipping machine correctly?
Wood chipping machines can process wood into regular and neat wood chips. The final serpihan kayu can be used to make paper and a variety of lumber. Many wood processing plants use wood chipper.
Although the operation of a wood chipper is simple, we should pay attention to be used correctly to avoid various losses caused by improper operation. Want to learn more about this machine, please check Wood chipper machine for sawdust-making plant.
Precautions for using wood chipping machine
Special attention to safety is required when using a wood chipper to prevent accidental injury and machine failure. Here are some important considerations when using a wood chipper:
- Wear appropriate personal protective equipment: Always wear safety glasses, earplugs, or earmuffs (to minimize noise damage to your hearing), work gloves, and a long-sleeved shirt when using a wood chipper. This equipment will protect your eyes, ears, and skin from wood chips and noise.
- Check the condition of the machine: Check that the mechanical parts of the wood chipper, the knives, and the power cord are intact before use. If any abnormality is found, stop using it immediately and have it repaired.
- Avoid hand proximity to knives: Never put your fingers or hands into the chipping area in the machine while it is running. Use a pusher or holding fixture to keep the wood stable and keep your hands safely away from the knives.
- Avoid overloading the machine: Do not attempt to process too much wood at once. Follow the recommended capacity in the machine manual to avoid overloading the machine, which could result in malfunction or damage.
- Regular Maintenance: Check the machine’s knives regularly to make sure they are sharp and tightened securely. Keep the machine clean as well and replace worn parts promptly.
Following these precautions can help ensure that you stay safe and minimize potential risks when using your wood chipper. Stay alert and cautious and always prioritize safety.
Normal maintenance of wood chipper
The wood chipper should be cleaned after every 300 hours of operation. If the bearings are oil-lubricated. Add new oil to fill the bearing seat clearance 1/3 is appropriate, at most not more than 1/2. before operation, just tighten the oil cup cover a little.
When the wood chipper bearings are seriously worn or damaged, they should be replaced in time and attention should be paid to strengthening lubrication. If you use tapered roller bearings, you should pay attention to check the axial spacing of the bearings to keep it 0.2-0.4 millimeters.